Procedure
- Combine Phase A ingredients, mix and heat to 80-85°C.
- Mix and melt Phase B materials, except for the pigment. Once the materials are melted, slowly add the pigment and mix.
- Once both Phases are at homogenous and at temperature, add Phase B to A and increase mixing speed.
- Mix at high speed until emulsion is smooth, then cool with slower mixing to 60°C.
- Add phase C.
- Continue mixing while cooling to 50°C or lower and pump into containers.
Stability Information
Three months at room temperature, three months at 50°C, three freeze/thaw cycles.
Supplier Information
- Koster Keunen, Inc.
- INEO
- Brenntag Specialties
- DSM
- Sensient, Inc.
- Barentz
- Vantage
- Seppic
- Kobo
- Rita
Ingredient Trade Name |
INCI Name |
% |
|---|---|---|
| Phase A | ||
| Deionized Water | Aqua | 55.25 |
| Butylene Glycol7 | Butylene Glycol | 3.0 |
| Solagum AX8 | Acacia Senegal Gum (and) Xanthan Gum | 1.0 |
| CELL-U-LASH 1509 | Cellulose | 1.0 |
| Tealan 9910 | Triethanolamine | 0.75 |
| Phase B | ||
| Kostol Natural E1 | Behenyl Alcohol, Polyglyceryl-3 Stearate | 3.0 |
| Synthetic Beeswax 1221 | Synthetic Beeswax | 6.0 |
| Rice Bran Wax (Wax# 224)1 | Oryza Sativa (Rice) Bran Wax | 3.0 |
| Kester Wax K-70P1 | C18-38 Alkyl Hydroxystearoyl Stearate | 2.0 |
| Stearic Acid 92%1 | Stearic Acid | 2.0 |
| Indopol H-1002 | Polyisobutene | 4.0 |
| Ganex V-220F3 | VP/Eicosene Copolymer | 2.0 |
| Vitamin E Acetate4 | Tocopheryl Acetate | 1.0 |
| Unipure Triple Black LC 9905 | Iron Oxides CI 77499 | 11.0 |
| Phase C | ||
| Lincoserve WpH-LO6 | Pentylene Glycol (and) Caprylyl Glycol (and) Propanediol (and) Ethylhexylglycerin | 1.0 |
| NatPure Film AP5 | Pullulan (and) Sorbitol (and) Trehalose (and) Acacia Senegal Gum | 4.0 |

