Procedure
- Combine Phase A ingredients and heat to 85°C with mixing.
- Melt and mix Phase B materials, except for the pigment.
- Once the materials are melted, slowly add the pigment under agitation.
- Continue to mix, while maintaining a temperature of 85°C.
- Once both phases reach temperature, add Phase B to Phase A.
- Mix, then cool until 50°C and add Phase C ingredients, one at a time mixing after each addition.
- Cool to RT and pump into containers.
Stability
Three months at room temperature, three months at 45°C, three freeze/thaw cycles.
Suppliers
- Koster Keunen, Inc.
- Tri-K
- Kobo, Inc.
- AkzoNobel
- Jeen International
- Sensient
- Brenntag Specialties
Ingredient Trade Name |
INCI Name |
% |
---|---|---|
Phase A | ||
Deionized Water | Aqua | 44.9 |
Glycerin | Glycerin | 3.0 |
Quinoa Pro NPNF2 | Hydrolyzed Quinoa | 1.0 |
CELL-U-LASH 1503 | Cellulose | 1.0 |
Amaze XT4 | Dehydroxanthan Gum | 0.3 |
Potassium Hydroxide | Potassium Hydroxide | 0.3 |
Phase B | ||
Kostol Natural E1 | Behenyl Alcohol, Polyglyceryl-3 Stearate | 2.5 |
Kester Wax K-BWR1 | Behenyl Behenate, Polyhydroxystearic Acid, Euphorbia Cerifera (Candelilla) Wax | 6.0 |
Rice Bran Wax1 | Oryza Sativa (Rice) Bran Wax | 5.0 |
Stearic Acid1 | Stearic Acid | 2.0 |
Kester Wax K-60P1 | Polyhydroxystearic Acid | 2.0 |
Jeechem CTG5 | Caprylic/Capric Triglyceride | 6.0 |
Unipure Black LC 9896 | Iron Oxides CI 77499 | 12.0 |
Phase C | ||
SDA Alcohol | Alcohol Denat | 5.0 |
Optiphen7 | Phenoxyethanol, Caprylyl Glycol | 1.0 |
Carnauba Milk Paraben Free1 | Copernicia Cerifera (Carnauba) Wax, Ceteareth-20, Lecithin, Caprylyl Glycol, Phenoxyethanol, Hexylene Glycol | 8.0 |